Ideally, a new pair of shoes should be comfortable and fashionable. However, you may find a lot of options in footwear shops that meet these 2 criteria, but at the same time their quality is so bad that they won’t last long. We decided to find out what things you should pay attention to in order to choose a really high-quality pair.
Check the shoes for smudges and glue marks.
Manufacturers often use glue to stick together different parts of the shoe. If the glue is of high quality and the work is done properly, the pair will last a long time. However, small glue drips in the spots where parts meet or traces of glue on the surface indicate that you are looking at low-quality shoes and that there were issues during production.
When a part of the shoe, its sole or insole, comes off a bit, it means the shoemaker probably used bad or expired glue, and this pair will fall apart quickly.
Examine whether the pair is symmetrical.
Quality shoes in a pair should be symmetrical, and any differences between the right and left shoes most likely indicate a defect. To check this, you need to put the soles of both shoes together and see if they match in length and width.
It’s also worth putting the pair on the floor to understand whether the height and outline of the upper edge of the heel are symmetrical. If the soles are painted in different colors, check whether the paint is within the borders of the sole and whether the pattern matches. Gross irregularities in symmetry indicate that the manufacturer didn’t pay much attention to quality.
Check the seams carefully.
Any uneven or diverging seams make shoes look not that good. This happens if the manufacturer used too thin threads or the work was done poorly. As a result, such a pair will fall apart much faster. It’s also necessary to check the uniformity of stitches and the evenness of the seam itself.
If its line is curved or zigzag-looking, this means that the shoes you’re looking at are of poor quality and will lose their appearance in a couple of months. And zigzag-looking stitch is often used to hide the imperfections of the stitching.
Examine the heels.
The heel must be firmly attached to the sole and not wobble. It’s necessary to look at the shoes from the side. In good quality pumps, the high heels are positioned exactly under the center of the heel and touch the ground at a slight incline.
It’s worth looking carefully at the heels from behind – any deviation of the heels from the angle of 90⁰ indicates a defective product. Moreover, these shoes are simply dangerous to wear – this may lead to ankle injuries.
Loose eyelets are a bad sign.
Any metal or plastic parts on the shoe (especially those that come into contact with the skin) should be tightly fastened. Thus, it’s worth carefully examining the eyelets for laces. Although this defect is quite rare, it can lead to wearer’s injury.
You should also check how well any embellishments are attached to the shoe. If they fall off at one point, the pair won’t look good anymore.
Carefully inspect the inside of the shoe.
Some manufacturers save on the training of workers and don’t calibrate equipment before the production of a new product line. As a result, shoes, boots and sneakers may have seemingly insignificant defects such as wrinkles and creases. If these defects are small, they won’t cause much trouble to the wearer. But large creases can rub the skin while walking, which will lead to abrasions and blisters on the feet.
Examine the insoles.
Even if a shoe looks perfect from the outside, you need to scrutinize it from the inside too. If the insoles show small wrinkles and creases, this pair is likely to be uncomfortable to wear. In addition, you should carefully feel the insoles to make sure that there are no bubbles on them.
Another important thing is that there must be cushioning between the insole and the sole, especially in the toe and heel area. Otherwise, a long walk in these shoes will make not only your feet and legs sore, but also your back.
Check how the shoes smell.
Low-quality and cheap shoes often have a strong chemical odor. It’s best to refrain from buying this pair. But if shoes or boots exude the scent of leather, polish or wood, you’ve found the shoes of high quality.
Take a photo of the shoes.
Of course, shoes made of synthetic materials can also be of high quality, especially when it comes to sports models. But good shoes should ideally be made of leather. They are softer and fit better on the foot, which means they will be much more comfortable to wear.
However, the quality of leather also varies. Often, manufacturers don’t mention the type of leather they use to make shoes in order to keep costs down. To determine the quality of the product you are holding in your hands, you need to take a photo of the shoes and enlarge the image. If you can see pores on the leather, you can safely buy the shoes.
Bend the shoe a little bit.
You don’t need to knead your shoes too much, but you can bend the shoe slightly to see how flexible the sole is and whether it remains attached to the upper part when moved. In addition, it’s worth pressing the sides of the shoe a little bit. Throughout the day, our feet usually increase in size a little, so a quality pair should adapt to these changes.
Check how your shoes sound.
Most shoe shops have soft carpeting on the floor, so it’s a good idea to take a short walk on a harder surface before making a purchase. If the soles and heels make unpleasant clanking noises when you walk, you are likely to be wearing a low-quality pair. And platform or wedge shoes shouldn’t sound like there are voids inside the sole.
Examine the material of the sole and heel carefully.
Usually the sole of a really good quality pair is made of leather or good rubber. These shoes are comfortable to wear, and in addition, they almost don’t slip. At the same time, if the base of the sole is uneven, then these shoes will be uncomfortable.
In addition, it’s worth examining the material from which the heels are made. If the manufacturer used plastic or didn’t cover the heel with leather or fabric, then you are looking at a cheap product that is far from being perfect.
Rub the shoes with a cloth.
Sometimes manufacturers use poor quality leather dyes, which can leave marks on the skin or clothes. Therefore, before buying, you should carefully rub the shoes inside and outside, first with a dry cloth and then with a damp cloth. If there are no marks on the fabric, the shoes are okay.
And here’s a list of fashionable shoes that are not as cool as they look.
Dan Haggerty, Who Played Grizzly Adams
In the 1974 film “The Life and Times of Grizzly Adams” and the NBC television series of the same name, Dan Haggerty portrayed a kind mountain man with a lush beard and a bear named Ben. Haggerty passed away on Friday in Burbank, California.
He was seventy-three.
According to his buddy and manager Terry Bomar, the cause was spine cancer.
Mr. Haggerty was employed in Hollywood as an animal trainer and stuntman when a producer asked him to reprise portions of the film’s opening sequences, which were about a woodsman and his bear.
Based on Charles Sellier Jr.’s novel “The Life and Times of Grizzly Adams,” it narrated the tale of a man from California who runs away from the woods after being wrongfully convicted of murder. There, he befriends the local wildlife and tames an abandoned bear.
Mr. Haggerty consented, provided that he may do the full film. After being remade for $165,000, the movie finally brought in close to $30 million from ticket sales. After that, it was made into a television series, and in February 1977, Mr. Haggerty returned to his environmentally conscious duty as the forest’s defender and animal buddy.
John Leonard described the first episode in The New York Times as “lukewarm to the heart.” Mad Jack (Denver Pyle) and the honorable red man Makuma (Don Shanks) bring bread and advise to the man and bear who have taken up residence in a log cabin. Bear washes his fur while the man traps his as they depart the cabin. There’s also a lot of connecting with nature, raccoons, owls, deer, bunnies, hawks, badgers, cougars, and a lump in the throat.
Warm and nostalgic, the show won over fans to Mr. Haggerty, who went on to win the 1978 People’s Choice Award for best new series actor. “Grizzly Adams” gave rise to two sequels: “Legend of the Wild,” which aired in 1978 and was eventually released in theaters in 1981; and “The Capture of Grizzly Adams,” which aired as a TV movie in 1982 and saw Adams being brought back to his hometown by bounty hunters in order to clear his record.
On November 19, 1942, Daniel Francis Haggerty was born in Los Angeles. After his parents divorced when he was three years old, he had a difficult upbringing and repeatedly escaped from military school. Eventually, he moved in with his actor father in Burbank, California.
He wed Diane Rooker at the age of 17. The union broke down in divorce. In 2008, he lost his second wife, Samantha Hilton, in a motorbike accident. His children, Don, Megan, Tracy, Dylan, and Cody, survive him.
In his debut movie, “Muscle Beach Party” (1964), he starred with Frankie Avalon and Annette Funicello as physique builder Biff. Then came came cameos in nature and motorcycle movies, such as “Biker With Bandana” and “Bearded Biker.” In “Easy Rider,” he made a fleeting appearance as a visitor to the hippie commune visited by Dennis Hopper and Peter Fonda.
In reality, Mr. Haggerty kept a variety of wild animals that he had either tamed from birth or rescued from harm on his tiny ranch in Malibu Canyon. His abilities brought him work as a stuntman and animal trainer on the television shows “Daktari” and “Tarzan,” in addition to sporadic roles in movies. “People magazine didn’t like actors jumping on them,” he said in 1978.
He acted as a Siberian tiger trapper in “Where the North Wind Blows” (1974), one of his outdoor-themed flicks, and in “The Adventures of Frontier Fremont” (1976). In the David Carradine movie “Americana,” he had an appearance as a dog trainer (1983). He portrayed a figure who was strikingly similar to Grizzly Adams in the movies “Grizzly Mountain” (1997) and “Escape to Grizzly Mountain” (2000).
As his career faded, Mr. Haggerty starred in horror movies such as “Axe Giant: The Wrath of Paul Bunyan” (2013), “Terror Night” (1987), and “Elves” (1989), in which he played an inebriated mall Santa. He was given a 90-day jail sentence in 1985 for supplying cocaine to two police agents who were undercover.
A negligent diner carrying a flaming cocktail ignited Mr. Haggerty’s well-known beard in 1977. He attempted to put out the fire, but instead burned his arms in the third degree. He was sent to a hospital where he would have therapy that would likely take a month.
“For the first few days, I was like a wounded wolf trying to heal myself—I just laid in the dark room drinking water,” he said to People. “Nurses urged me to open the curtains and attempted to give me morphine.” But occasionally, animals have better medical knowledge than humans. After ten days, he left the hospital on foot.
Leave a Reply